LSU Mechanical Engineering Professor Researching 3D Printing of Bridge Structures Via Robotic SystemsPage Title
July 1, 2024
BATON ROUGE, LA – LSU Mechanical Engineering Associate Professor Genevieve Palardy recently received funding for her research on “free-standing polymer composites for robotic-driven bridge construction.” The $30,000 grant was awarded by the Louisiana Transportation Research Center. LSU ME Assistant Professor Corina Barbalata is working with Palardy on the project.
“The main objective of this project is to perform preliminary research to enable free-standing 3D printing of bridge structures using fiber-reinforced polymers and robotic systems,” Palardy said. “To do this, we proposed two main tasks—study the relationship between material properties and 3D-printing parameters and investigate free-standing 3D-printing capabilities using fiber-reinforced polymers, either with a bench-top printer or robotic arm system.”
At the beginning of the project, Palardy and Barbalata sponsored an ME senior design project for the development of a large-scale robotic system. A team of four ME students combined a Kuka robotic arm with a custom-designed end-effector to print continuous fiber-reinforced photopolymer filaments. Free-standing printing is enabled via UV light, which solidifies the material as it is extruded.
“With free-standing printing, the idea is that you can just print in the air so there is no need for supports, allowing manufacture of a structure more easily with less material waste,” Palardy said. “Also, the flexibility of the robotic arm allows the manufacturing of more complex structures like trusses.”
Palardy and Barbalata are using two different types of resin systems to compare their capabilities in terms of free-standing printing and mechanical performance. One type of resin was synthesized in collaboration with LSU Chemistry Department Chair John Pojman and his students as part of an LaSPACE/LA NASA EPSCoR award. The other resin is a commercially-available photopolymer that solidifies under UV light.
“We did some mechanical characterization on small-scale samples, and then we did some initial prints with the large-scale robotic system to demonstrate that we can print free-standing structures with reasonable quality,” Palardy said. “We hope to get to the bridge or truss structures later on, past this one-year project.”
The project was made possible via support from the LSU Mechanical Engineering Department, the National Science Foundation, and the Louisiana Board of Regents for the Louisiana Materials Design Alliance.
Like us on Facebook (@lsuengineering) or follow us on X (formerly Twitter) and Instagram (@lsuengineering).
###
Contact: Libby Haydel
Communications Manager
225-578-4840
ehaydel1@lsu.edu
Latest College of Engineering News
- LSU Researchers Awarded $1.5 Million to Advance Worldwide Access to High-Performance ComputingSeptember 13, 2024data center The LSU researchers’ goal is to make high-performance computing more accessible across all computational platforms to a broader range of researchers and organizations—all to accelerate scientific research to solve global challenges.LSU researchers have been awarded a $1.5 million Pathways to Enable Open-Source Ecosystems, or POSE, grant from the National Science Foundation to advance the ecosystem surrounding HPX, a software library developed at LSU. Their goal is a fast and energy-efficient solution to increase worldwide access to high-performance computing. Lack of access and performance currently limits the success and usefulness of emerging technologies, such as AI and machine learning, and computational modeling in almost every field.
- LSU Electrical, Computer Engineering Professor Designs Intelligent Drone for Rescue OperationsSeptember 18, 2024BATON ROUGE, LA - The National Fire Protection Association estimates that one home fire-related death occurs in the U.S. every three hours and 14 minutes, and one home fire-related injury occurs every 53 minutes. These are numbers LSU Electrical and Computer Engineering Assistant Professor Xiangyu Meng hopes to change for the better through his design of an intelligent drone that will use thermal technology during rescue operations, particularly for firefighters.
- LSU, Integer Partner to Optimize U.S. Navy, Marine Corps OperationsSeptember 9, 2024BATON ROUGE, LA - A team of LSU researchers has been tasked with helping the U.S. Navy and Marine Corps make the transformation to Distributed Maritime Operations (DMO), which would allow the two military branches to move beyond traditional reliance on a few large vessels and instead emphasize a distributed network of smaller naval platforms that enhance presence and awareness in vital maritime regions.
- LSU Computer Science PhD Student Wins Pair of Best Paper AwardsSeptember 3, 2024BATON ROUGE, LA - Prior to this summer, LSU Computer Science Ph.D. student Taha Gharaibeh had never won a Best Paper award, which is typically given in recognition of the quality and impact of the published work.
- LSU Engineering, LSUHSC School of Dentistry Collaboration Illustrates Benefit to IndustryAugust 30, 2024BATON ROUGE, LA - Each year, 9 million people in the U.S. get braces. Whether it's to fix a bad bite or simply gain a more attractive smile, braces have almost become a rite of passage in Western culture. In an attempt to improve the effectiveness of bonding material used in braces, LSU Health Sciences Center (LSUHSC) School of Dentistry-Prosthodontics is collaborating with LSU's College of Engineering on three projects led by LSUHSC Digital Fabrication Center Director and LSU Petroleum Engineering Assistant Professor of Research Charles Taylor.
- LSU-Southern Cyber Project to Protect Nation’s Electric Vehicle Infrastructure, Build WorkforceAugust 22, 2024A collaborative team at LSU and Southern University has been awarded a $1.2 million grant from the National Science Foundation to address critical cybersecurity vulnerabilities in electric vehicle charging stations. Discovered by LSU cybersecurity expert Elias Bou-Harb and his team, these vulnerabilities pose significant risks, including the potential for hackers to access and exploit tens of thousands of EV charging stations connected to the power grid. This project not only aims to secure these systems but also to educate and train a more diverse cybersecurity workforce, leveraging the strengths of both universities.