Mechanical Engineering Seniors Design Equipment for B-52s at Barksdale AFB
May 10, 2024
BATON ROUGE, LA – As part of their senior capstone project, six LSU Mechanical Engineering seniors have been working with Barksdale Air Force Base in Bossier City, La., to design an apparatus that will enable airmen to more easily work on or change out the engines on their B-52 bombers. Considering Barksdale AFB houses 26 B-52s, and each B-52 has eight engines, the students’ design should definitely come in handy.
Hannah Beene of Cyber Innovation Center, an innovation arm of the Air Force Global Strike Command Office of the Chief Scientist headquartered at Barksdale AFB, has been the point of contact between the LSU students and Barksdale AFB.
“Our role is to further AFGSC’s mission by fostering innovation and collaboration between industry, academia, business, and government to meet technology challenges,” Beene said.
When ME seniors Vaughn Bell of Ponchatoula, La.; Seth Chiasson of Denham Springs, La.; Matthew Day of Slaughter, La.; Sydney Gambino of Madisonville, La.; Stephen Freemen of Katy, Texas; and Ryan Purvis of Mandeville, La.; saw they had an opportunity to work on a project involving a B-52, they jumped at the chance.
“When it came time to choose my capstone project, I was excited as soon as I saw B-52 on the project list and immediately knew that was my top choice,” Bell said.
In October 2023, the students traveled to Barksdale AFB to see the B-52 engine in person and take measurements and photos to help them design their engine stand. The Air Force’s request was that they design something lighter and more compact than their current stand, which resembles a boat trailer and takes up much-needed room on the C-17 plane that flies alongside the B-52, carrying necessary cargo such as two spare engines.
The students’ design consists of four 3-ft.-high jack-stands that form a 4.5-ft. by 10.5-ft. rectangle supporting four aluminum I-beams on each corner and two long steel tubes that will hold two 80-lb. adapters a little more than 10 ft. apart that ultimately touch and support the engine. The whole stand holds up to 6,000 lbs., the estimated weight of a single B-52 engine.
“The engine has very specific points where it can be attached to the adapter, so our
design must support the weight of the engine and interface with the adapter,” Bell
said.
The students tested their stand at Reeb Rigging in Baton Rouge, where they were able to load 6,000 lbs. on their stand. The students also worked with Brock Group in Port Allen, which did some welding on the stand while the students themselves cut the materials to size in the LSU Advanced Manufacturing and Machining Facility (AAMF) across from Patrick F. Taylor Hall.
The team also performed a timed test to make sure its stand could be assembled in 15 minutes or less. When disassembled, the entire stand fits into a 24x60x24-inch D box that goes on the C-17 plane to hold a damaged engine if it needs to be replaced. While the C-17 carries a spare engine for the left and right side of the B-52, the B-52 itself carries eight engines at a time (up to 48,000 lbs.) in pods supported by four pylons beneath the wings’ leading edge. Their placement allows them to work as wing fences and delay the onset of a stall.
What makes the B-52 so unique is its size and function. The 185-ft. wide plane weighs 185,000 lbs. and was designed and built by Boeing for the U.S. Air Force in the 1950s. Its purpose was to carry nuclear weapons during the Cold War era, though NASA used it for 40 years as an air-launch and testbed aircraft. The B-52’s ability to stay in the air for more than 72 hours at a time, along with its excellent performance at high subsonic speeds, are why the USAF still uses the B-52 today.
“What I’ve enjoyed most about this project is getting the chance to say I’ve designed and worked on something for the B-52 engine,” Freeman said. “I don’t know who wouldn’t find that interesting.”
Like us on Facebook (@lsuengineering) or follow us on X (formerly Twitter) and Instagram (@lsuengineering).
###
Contact: Libby Haydel
Communications Manager
225-578-4840
ehaydel1@lsu.edu
Latest College of Engineering News
- LSU ChE, SJA Students Study Breast Cancer in 3D EnvironmentOctober 24, 2022BATON ROUGE, LA - Though October is recognized nationally as Breast Cancer Awareness Month, LSU faculty and students are working every month to help combat the potentially fatal disease that has been projected to affect nearly 340,000 Americans this year.
- Testing Backdate
- LSU Researchers Create Low-Cost Method to Recycle PlasticBATON ROUGE – LSU researchers have created a new, low-cost way to break down plastic, a potential breakthrough that could save billions of dollars and eliminate billions of tons of plastic pollution.
- CEE's Mohammad Appointed to Editorship of ASCE PublicationBATON ROUGE, LA - LSU Civil and Environmental Engineering Professor Louay Mohammad has been selected to serve as co-editor-in-chief of the Journal of Materials in Civil Engineering (JMCE), a publication of the American Society of Civil Engineers (ASCE).
- LSU Construction Management Professor Developing Occupant-Centric Energy Management SystemBATON ROUGE, LA - Thermostat wars are not just limited to the home; they are also common in office environments and can result in negative outcomes like adversely affecting worker productivity and driving up energy costs unnecessarily.
- LSU Civil and Environmental Engineering Professor Develops Software to Protect Offshore WindfarmsIn July 2023, the U.S. Department of the Interior announced that it would hold the first-ever offshore wind energy lease sale in the Gulf of Mexico. Since then, renewable energy companies have expressed interest in wind farming, with the Bureau of Ocean Energy Management finalizing four Wind Energy Areas that could produce enough clean, renewable energy to power more than 3 million homes. However, with this rapid growth comes challenges, such as protecting these wind farms from hurricanes.